Ribbon
Poinsettia Ornament
Materials List:
- 11/2
yds. of 11/2" wide wire-edge taffeta ribbon
with gold metallic edge
- 9"
of 11/2" wide wire-edge gold ribbon
- 4mm
gold beads
- Wire
- Hot
glue gun
Instructions:
1. To form inner petals, cut 3-6" lengths of
wire-edge taffeta ribbon. Cut the ends of each length
into a sharp point. Pinch the lengths at the center and
wire the three lengths together. Shape petals into a
circle.
2. To form the outer petals, cut 4-8" lengths of
wire-edge taffeta ribbon. Cut the ends of each length
into a sharp point. Pinch the lengths at the center and
wire them onto the inner petals. Shape petals into a
circle.
3. To form the leaf, cut the ends of the wire-edge gold
ribbon into a sharp point. Pinch at the center and wire
onto the back of the outer petals.
4. Place a dime-size puddle of glue in the center of the
ribbon poinsettia. Sprinkle with gold beads and pat down
to hold. Shake off excess beads.
Poinsettia
Crafts Index
|
|
